Maxim-integrated MAXQ Family Users Guide: MAXQ2010 Supplement Instrukcja Użytkownika Pobierz pdf (Strona 71)

MAXQ Family User’s Guide:

MAXQ2010 Supplement

15-1

ADDENDUM TO SECTION 15: TEST ACCESS PORT (TAP)

The JTAG/TAP port on the MAXQ2010 is multiplexed with port pins P6.0, P6.1, P6.2, and P6.3. These pins default to the

JTAG/TAP function on reset, which means that the part is always ready for in-circuit debugging or in-circuit program-

ming operations following any reset.

Once an application has been loaded and starts running, the JTAG/TAP port can still be used for in-circuit debugging

operations. If in-circuit debugging functionality is not needed, the associated port pins can be reclaimed for applica-

tion use by setting the TAP (SC.7) bit to 0. This disables the JTAG/TAP interface and allows the four pins to operate

as normal port pins.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 146 147

Brak uwag

Maxim-integrated MAXQ Family Users Guide: MAXQ2010 Supplement Instrukcja Użytkownika Strona 71