Maxim-integrated 73M1866B/73M1966B FXOCTL Application Instrukcja Użytkownika Pobierz pdf (Strona 6)

73M1866B/73M1966B FXOCTL Application User Guide UG_1x66B_009

6 Rev. 4.1

1.2 FXOCTL Command Summary

Entering fxoctl at the command line brings up the FXOCTL program. Refer to the individual command

descriptions in Section 2 for syntax and usage.

When running the FXOCL program displays the following prompt:

FXOCTL:XX> where: XX is the current active channel.

The FXOCTL program can manage all 16 FXO channels as supported in the 73M1x66B daisy chain

configuration. Each channel is independently run on an FXO device or the 73M1x66B chip set. Upon

startup the current active channel is defaulted to channel 0. In which case the prompt will look like this:

FXOCTL:00>

Most commands, without specifying channel number, apply to current active channel. However, some

commands provide options for selecting a desired channel (other than the current active channel).

Table 1 provides an overview of the commands implemented in the FXOCTL Application.

Table 1: Summary of FXOCTL Commands

Command Syntax

Description

Displays the Help screen – same as the Help command.

autoanswer

Sets channel to auto answer mode. When set, the application automatically

answers the incoming RING by going off-hook and performs PCM parameter

setting.

answer

Manually answers a call. This command manually answers the RING by going

off-hook and performs PCM parameter setting.

billingtonefilter

Billing tone filter disable/enable command.

callmonitor

Managing the setting of call progress monitor audio.

channel

Sets active channel ID.

countryconfig

Managing the default country setting parameter.

dial

Performs pulse dialing.

display

Not implemented.

exit

Exits the FXOCTL program.

gpio

Managing GPIO operation.

help

Displays the Help screen.

iet

Interval Event Table. Used to manage the IET table such as list active IET

entries, delete entries and update IET entries.

loopback

Managing loopback operation.

measure

Measures voltage/current. This command initiates or terminates voltage or

current measuring session.

offhook

Takes an FXO channel off-hook.

ohhook

Takes an FXO channel on-hook.

Manages the 73M1x66B internal registers (read/write).

samplerate

Select PCM sample rate – 8 or 16 kHz operation.

threshold

Modifying line parameter threshold.

quit

Same as exit.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

Maxim-integrated 73M1866B/73M1966B FXOCTL Application Instrukcja Użytkownika Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Maxim-integrated 73M1866B/73M1966B FXOCTL Application