Maxim-integrated 71M6533-DB Instrukcja Użytkownika Pobierz pdf (Strona 12)

71M6533-DB Demo Board User’s Manual

Page: 12 of 75 ` REV 3

Configure button. Port speed and flow control are configured under the General tab (Figure 1-4, left), bit settings

are configured by pressing the Configure button (Figure 1-4, right), as shown below. A setup file (file name

“Demo Board Connection.ht”) for HyperTerminal that can be loaded with File  Open is also provided with the

tools and utilities.

Port parameters can only be adjusted when the connection is not active. The disconnect

button, as shown in Figure 1-3 must be clicked in order to disconnect the port.

Figure 1-3: Hyperterminal Sample Window with Disconnect Button (Arrow)

Figure 1-4: Port Speed and Handshake Setup (left) and Port Bit setup (right)

Once, the connection to the demo board is established, press <CR> and the command prompt, >, should

appear. Type >? to see the Demo Code help menu. Type >i to verify the demo code revision.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 74 75

Brak uwag

Maxim-integrated 71M6533-DB Instrukcja Użytkownika Strona 12